Salter Brecknell 405 Manuel d'utilisateur télécharger pdf (Page 4)

4.0 Scale Operation

Turning on the scale:

Be sure the battery is charged or that the AC adapter is plugged in.

Press the On/Off/Zero key on the front panel to turn the scale on. See

illustration above.

When the startup routine is finished, the scale is ready.

Simple weighing:

Empty the scale and press the On/Off/Zero key if the display is not at 0.

Place item(s) to be weighed on the scale. Weight is displayed.

Remove item and repeat process.

Tare/Net weighing:

Empty the scale and press the On/Off/Zero key if the display is not at 0.

Place container to be tared on the scale and press the Tare/Units key for

less than five seconds. Net annunciator lights when a tare is active.

Place item(s) to be weighed in the container. Net weight is displayed.

Remove and repeat process.

Removing a tare:

To remove an active tare weight, empty the scale, wait for the scale to

stabilize. The unit of measure annunciator will glow steady when the scale

is stable or blink while motion occurs. Press the Tare/Units or On/Off/Zero

key to remove the active tare.

Changing unit of measure:

Press and hold the Tare/Units key for five seconds to change the unit of

measure. Repeat to change to the next unit of measure.

Turning the scale off:

Press and hold the On/Off/Zero key for five seconds.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Salter Brecknell 405 Manuel d'utilisateur Page 4