Salter Brecknell B 120 Manuel d'utilisateur télécharger pdf (Page 2)

B120_u_AWT35-500140.book

Warnings

Safe Installation

Pluggable equipment must be installed near an easily accessible socket

outlet.

The socket outlet must provide a protective earth contact and the electrical

supply to the outlet must provide over current protection of an appropriate

rating.

Permanently protected equipment must have a readily accessible disconnect

device incorporated in the fixed wiring.

The fixed wiring must provide a protective earth connection and the supply

must incorporate over current protection of an appropriate rating.

USA

If the scale is connected to a 240V supply, the receptacle must be protected

by a 15 amp circuit breaker.

This equipment is intended for use in dry conditions.

For your protection, all mains (110V or 240V) equipment used out of

doors or in wet or damp conditions should have adequate

environmental protection.

We recommend:

• a correctly fused source protected by an approved outlet/connector that

complies with local legislation (BS7071 or BS7288 in the UK).

• or an RCD protected supply to BS EN 61008 or BS EN 61009 (UK & Europe)

IF IN DOUBT, SEEK ADVICE FROM A QUALIFIED ELECTRICIAN.

A copy of the original signed declaration for this instrument is available from

the UK address at the end of this book.

Declaration of Conformity

Manufacturer Salter Brecknell

Type B120

Corresponds to the requirements of the following EC directives:-

Electro Magnetic Compatibility

Low Voltage Directive:

EMC 89/336/EEC

LVD 73/23/EEC

The application harmonised

standards are:

EN60950-1: 2002, EN61000-6-1: 2001

EN61000-6-3: 2001

1 2 3 4 5 6 7 ... 18 19

Pas de commentaire

Salter Brecknell B 120 Manuel d'utilisateur Page 2