Salter-brecknell PS2000 Manuel d'utilisateur

PS1000/PS2000 Floor ScaleUser Instructions AWT35-501201 Issue AA June 2013

8 PS1000/2000 User Instructions3 IntroductionThis chapter introduces indicator mounting, display and keypad operation in normal weigh mode.3.1 Indica

PS1000/2000 User Instructions 9 3.3 DisplayThe PS-500 indicator utilizes a 7 segment LCD (Liquid Crystal Display) providing the weight and system in

10 PS1000/2000 User Instructions3.4 KeyboardThe keyboard consists of four keys, some of which have multiple functions.Figure 3.2 SBI-521 KeypadTable

PS1000/2000 User Instructions 11 3.5 Navigating the Weigh Mode3.5.1 Power the IndicatorTurn the indicator on or off with the [ON/OFF] key.3.5.2 Ente

12 PS1000/2000 User Instructions3.5.6 Output Data (Print)When scale is stable press the [PRINT] key.3.5.7 Change Weight UnitPress the [UNIT] key to s

PS1000/2000 User Instructions 13 Table 3.5 Use lb as Primary Unit0.005kg 0.005kg 0.01 lb 0.2 oz0.05kg 0.05kg 0.1 lb 2oz0.5kg 0.5kg 1 lb Not availab

14 PS1000/2000 User Instructions3.6 Hold FunctionHOLD function can be used to freeze a displayed number. In this mode, the scale can capture a dynami

PS1000/2000 User Instructions 15 4 Setup Mode To set up the indicator, you must first enter the appropriate menu mode. The front panel keys become d

16 PS1000/2000 User Instructions4.3 Setup Menu ParametersThis section provides more detailed descriptions of the selections found in the Setup Menu.

PS1000/2000 User Instructions 17 P5 0-4 3 Baud rate for RS-232 0 = 1200 bps 1 = 2400 bps2 = 4800 bps3 = 9600 bps4 = 19200 bpsp6 0-2 0 RS-232 protoco

© Brecknell, LLC 2013. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system, or transmitted in

18 PS1000/2000 User Instructionsp15 0-3 1 Weight signal not within power on zero point range0 = current weight1 = calibration zero-point2 = switch-of

PS1000/2000 User Instructions 19 Table 4.3 Calibration Resolution (P7)Table 4.4 Calibration Units (kg) per P8, P9 and P10Parameter ChoiceCalibrati

20 PS1000/2000 User InstructionsTable 4.5 Calibration Units (lb) per P8, P9 and P100.005kg 0.005kg 0.01 lb 0.2 oz0.05kg 0.05kg 0.1 lb 2oz0.5kg 0.5kg

PS1000/2000 User Instructions 21 4.4 Relationship of Capacity and P7, P8 and P9 SettingsTable 4.6 Capacity Unit is kg or lb (Count by 1)Resolution

22 PS1000/2000 User InstructionsTable 4.7 Capacity Unit is kg or lb (Count by 2)Resolution set by P7Division set by P8 (P8 = 1) and P90.0002 0.002 0

PS1000/2000 User Instructions 23 Table 4.8 Capacity Unit is kg or lb (Count by 5)Resolution set by P7Division set by P8 (P8 = 2) and P90.0005 0.005

24 PS1000/2000 User Instructions4.5 Exit the Setup Menu1. Power off the indicator by pressing and holding the [ZERO/ON/OFF] key.2. Move the slide swi

PS1000/2000 User Instructions 25 5 CalibrationThe config/cal switch must be set to the ON position in order to calibrate the indicator.5.1 Calibrati

26 PS1000/2000 User Instructions9. Cal.p1 will be displayed. This is the second calibration point. The default standard weight is 50% of full scale.

PS1000/2000 User Instructions 27 In this mode, the proper ADC data at zero point can be viewed by examining the A/D data for loaded weight. m If the

PS1000/2000 User Instructions 1 Table of ContentsChapter 1 General Information and Warnings ...

28 PS1000/2000 User Instructions6 Serial Communication6.1 Com Port 1COM1 is a RS-232 bi-directional port. Communication wires are connected to the RS

PS1000/2000 User Instructions 29 Table 6.2 Symbols UsedTable 6.3 Bit Definition of H1H2H3<LF> Line Feed character (hex 0AH) <CR> Carri

30 PS1000/2000 User Instructions6.4 Commands and ResponseCommand: W<CR> (57h 0dh), request current readingCommand: S<CR> (53h 0dh), reque

PS1000/2000 User Instructions 31 Command: U<CR> (55h 0dh)Command: L<CR> (4ch 0dh)Command: X<CR> (58h 0dh)Command: all othersTable

32 PS1000/2000 User Instructions

PS1000/2000 User Instructions 33 7 TroubleshootingThis chapter gives explanations on commonly seen errors, display characters and display symbols.7.

34 PS1000/2000 User Instructions7.2 Display Symbols7.3 Error Messages and TroubleshootingSymbol Description0------ Zero is over the setting range0___

Brecknell USA1000 Armstrong Dr.Fairmont MN 56031 Tel:507-238-8702Fax:507-238-8271Email: [email protected]://www.brecknellscales.comBreckne

2 PS1000/2000 User InstructionsCommands and Response ...

PS1000/2000 User Instructions 3 1 General Information and Warnings1.1 About this ManualThis manual is divided into chapters by the chapter number an

4 PS1000/2000 User Instructions1.2 Warningsl Read all operating instructions carefully before use.l Avoid lengthy exposure to extreme heat or cold. Y

PS1000/2000 User Instructions 5 CanadaThis digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set

6 PS1000/2000 User Instructions2 Specifications2.1 Scale Platform2.1.1 Capacityl PS1000: 500 kg x 0.2 kg / 1,000 lb x 0.5 lbl PS2000: 1000 kg x 0.5

PS1000/2000 User Instructions 7 2.2.2 Dimensionl 6.5” L x 3.2” H x 1.2” Wm 164 mm (L) x 762 mm (W) x 64 mm (H)2.2.3 Displayl 5-digit,7-segment, 0.62